![]() If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. Try turning the drum by hand when the machine is empty. A noisy washing machine may also indicate failed or worn bearings or drum spider. ![]() It’s also worth checking the drain filter to make sure that’s clear. You may be able to remove the drum paddles to get to the offending item or remove the sump hose or heater. The washing machine may stop due to these faults or the water rinse valve may be faulty or the machine has not emptied the water out of the drum in an allocated period of time.Ī rattle, while the drum is moving, could be due to something stuck in the drum, coins and bra wires are common culprits. ![]() This generally means that the timer, thermostat, or heater had failed. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults There are a number of things that can cause this, including worn carbon brushes, drive belt problems, or a faulty motor or control unit PCB. Water valve may be faulty See our video on water valves Make sure the door is properly closed, check that inlet hoses are clear and not kinked and that the water supply is connected and functioning.
0 Comments
Leave a Reply. |